Customer Needs · Our Pursuit

·world brand hydrulic pumps

Eaton hydraulic pump products

FeatureCodeDescription
CODE TITLEACNSERIES 26 GEAR PUMP (SINGLE UNIT)
UNIT TYPEELOAD SENSING FLOW DIVIDER W/ OR W/O RELIEF VALVE(SEE POSITIONS 16,17)
INPUT ROTATIONLLEFT-HAND ROTATION CCW
DISPLACEMENT1229 CM3/R [1.77 IN3/R]
INPUT SHAFTAB11 TOOTH 16/32 SPLINE, MIN FULL SPLINE 22.4 [.88], SHAFT EXT 31.8 [1.25]
MOUNTING FEATURES (FRONT)A(2-BOLT A) SAE FLANGE SERIES 82-2
AUXILIARY MOUNTING FEATURES (REAR)0NO REAR MOUNTING
PORTS SIZES & LOCATION-BACKPLATE63FLO DIV LOAD SENSING, SUCTION PORT 1.3125-12 UN-2B SAE O-RING PORT; PRIMARY PRESSURE PORT .750-14 UNF-2B SAE O-RING PORT; SECONDARY PRESSURE PORT .875-14 UNF-2B SAE O-RING PORT – REAR PORTS; LOAD SENSING PORT .4375-20 UNF-2B SAE O-RING PORT – SIDE PORT
PRIORITY FLOW DIVIDER SETTINGAYLOAD SENSING – DYNAMIC SIGNAL – BIAS PRESSURE 5.2 BAR[75 LBF/IN2]
RELIEF VALVE FULL FLOW SETTINGBW172.4 BAR [2500 LBF/IN2] LOAD SENSING
TEST DATAAUNIT SPECIFIC
SPECIAL FEATURES00NO SPECIAL FEATURES
PAINT0BBLACK PER SPEC 209-13B
IDENTIFICATION0STANDARD
DESIGN CODEAA
FeatureCodeDescription
CODE TITLEACNSERIES 26 GEAR PUMP (SINGLE UNIT)
UNIT TYPEAPLAIN
INPUT ROTATIONLLEFT-HAND ROTATION CCW
DISPLACEMENT0410.8 CM3/R [.66 IN3/R]
INPUT SHAFTAA9 TOOTH 16/32 SPLINE, MIN FULL SPLINE 22.4 [.88], SHAFT EXT 31.8 [1.25]
MOUNTING FEATURES (FRONT)A(2-BOLT A) SAE FLANGE SERIES 82-2
AUXILIARY MOUNTING FEATURES (REAR)0NO REAR MOUNTING
PORTS SIZES & LOCATION-BACKPLATE01PLAIN, SUCTION PORT 1.3125-12 UN-2B SAE O-RING PORT; PRESSURE PORT .875-14 UNF-2B SAE O-RING PORT – SIDE PORTS
PRIORITY FLOW DIVIDER SETTING00NO FLOW SETTING
RELIEF VALVE FULL FLOW SETTING00NO RELIEF VALVE SETTING
TEST DATA0GENERIC
SPECIAL FEATURESABFLUOROCARBON (VITON) HIGH PRESSURE SHAFT SEAL
PAINT00NO PAINT
IDENTIFICATION0STANDARD
DESIGN CODEAA